1650 Dual Feeding

Ideal for large production or frequent changes of media. Save time and operator efforts in film loading operations with media already set on the machine & ready for a quick installation on the laminators.
Save time and operator efforts . 4 rolls of media are ready to use in a flash

Perfect lamination on all types of media and printing Impressive adhesion results on UV prints with irregular surfaces and high relief

  • Working width 165 cm (65’’)
  • Top roller heated from 30 to 140°C – 86 to 284°F
  • rollers opening up to 50 mm (2’’)
  • Laminating speed up to 6 m/minute (21 ft/mn)
  • Pressure directly adjusted on the substrate according to its thickness
  • Laminating, one-sided encapsulation, application of tape, lamination up to 5 cm (2’’) thickness, use of thermal polyester films on the top side
Gas cylinder

Additional safety device to slow down the descent of the feeding tray

LED kit

Ideal to control your work in progress and highlight your finishing area

In-line cutting

To be installed on the aluminum output table, it comes with two indexable cutting heads to cut : laminated document or lamination film before application. Ideal when the print is less wide than the film.

Magnetic anti-static cord

Essential to unload the static generated by some supports

Remote control

Allows the operator to set drive function form a distance